K10 Auto Feed Wiper Bagging Press
Our wiper bagging presses are the perfect piece of machinery for baling up your wiping rags, it can be used as a stand alone unit for low end production or integrated into one of our larger systems for greater volumes and throughput.
AUTO FEED & WEIGH SYSTEMS
1kg – 50kg bale packs produced
weighing done while machine is compacting ensuring high throughput
weigh conveyor feeds directly onto the incline feed conveyor to the bagging press
The operator will make feed the weighing conveyor with the desired amount of wiping cloth required at the baling / bagging machine. Once the desired weight has been achieved the operator would depress the feed pedal to feed the material to the bagging unit. The weigh conveyor would then be re-fed with material to the desired amount.
For further automation of the feed we can add Bale tipping device, breakup conveyors etc.
FEED CONVEYOR TO BAGGING PRESS
The weigh conveyor would feed directly onto the incline feed conveyor to the bagging press, the two units working together are controlled to ‘thin out’ the material prior to feeding to the Bagging unit. This feature is very important in the process to ensure that the material feed into the baler is correct to ensure the uniformity of the finished bale.
WIPER BAGGING PRESS
The bagging Press can be designed to suit your exact needs / Bale weight, as a standard we typically manufacture machine to produce the following standard weight packs – 2, 5, 10, 12, 15 and 25 kg. we have made a few machine with a special weight of 1kg and also 50kg.
Capacity of the machine:- from 120 to 180 Packs per hour depending on your requirements.
Control:- All the electrical PLC controls and linked within the feeding system to ensure a fast production time for the process.
Hydraulic:- As a standard the Motor drive for the bagging unit is 15kw and rises as the bales per hour increase. Exact KW for the motor will vary depending on your capacity requirements.
Bale size:- This would vary depending on the model of machine / bale weight required.
ALL our machinery is designed and build in Great Britain to a high standard and the components we use are of high quality.
Production rate from 100 to 180 packs per hour.
For further automation of the feed we can add bale tipping device, breakup conveyors etc.
The bagging press can be designed to suit your exact needs / bale weight
From initial design of your requirements through to the final installation of your machines KME Ltd will walk you through each step to make sure that we create your master piece. We offer full service and support after installation a helping hand all the way.
KME Ltd have an impressive portfolio of both clients and products with worldwide influence. We pride ourselves on being able to provide industry leading machinery that outlasts our competitors and stands the test of time.
With a full team of inhouse design engineers with over 50 years experience we can create tailor made solutions for any recycling or agricultural facility, the sky is the limit and if we can create it you can have it!
Heritage & Experience
Established in 1980 KME Ltd have been manufacturing and supplying to the recycling industry for over 40 years offering full turnkey installation from Initial Concept & design,manufacture and installation