Shredders

Our range of shredders start from a small 10 HP unit and work up to a larger 50HP unit. The design of the basic unit is a twin shaft single / dual gearbox drive with a series of hooked blades with a width to suit the application. The feed hopper and stand is always manufactured to suit the requirement of the customer and the application.
the used for the machine would be to process the following:- paper, plastic pipe, plastic bottles, audio tape, CD's Cardboard etc.
For further info email:- andym@kenmills.co.uk



1200mm Supercut Shredder: with cross cut facility
This shredding unit has been specially designed to shred large width sheet into small diced pieces of around 18 x 18 mm. The initial cutters strip the material and with the addition of a third cross cutting shaft the strips are cut to length. This cross cut can be altered to vary the length of the cut to suit customers requirements.: The maximum width of material is 1200 mm (4'-0") x a thickness of approx. 20 mm depending on material. Total motor power of the unit is 18kw. This unit is mainly used for sheet cardboard with a throughput of approx. 1.5 tons per hour.
Adding dust extraction and a bagging unit can turn this machine into a full Animal Bedding System

Cr22700 shredder unit.

This unit has a dual gearmotor drive with a total drive of 22 kw and a chamber width of 700 mm. Shown below is a view inside the shredding chamber and a photo across showing the unit mounted directly above a T40 Horizontal bale press and an infeed conveyor to feed material.

Cr7445 shredder unit.

The CR7445 shredding unit is driven with a 7.5kw (10hp) motor gearbox and has a feed width of 445 mm. the cutter configuration as standard is 16mm cut twin shaft with a three hook blade.

Unit shown attached was installed at Coca-Cola for shredding the PET pre-form bottles to assist in the storage and transport of the product ready for recycling. The machine was fitted with a hydraulic pusher unit to assist feeding into cutting chamber which was fed by means of an infeed conveyor.

For further information please email us from below.