Ken Mills Engineering Ltd

Mutilating Machine

The Mutilating machine has been designed with a completely unique cutting/feed system to the conventional machine with high speed cutting action. The 6 cutting blades cut through the material power by a single hydraulic cylinder on a cycle of approx. 30 seconds. The method of feeding the material is the key to achieving the high production rate where the material is fed through the blades @ 300mm (12") thick (Not in single garment form as existing machines.) The slower cutting action lengthens machine and cutter life where on average a set of blades may last up to 3 months prior to sharpening.

Key Benefits:-

High production, Up to 2000 kg (4,000 LB) Dependant on material.

Cutting blades have long life prior to re-sharpening.

Compact size of machine.

Positive unique feed system ensure constant throughput.

6 Cutting blades provide a perfect mutilation of garments.

Simplicity in design ensures low maintenance cost.

Combined feed and cut design leads to continuous operation. No Jamming.

Easily installed within existing process.

Low noise. (<80 dba)

For further information please email us from below.

Machinery designed and manufactured by Ken Mills Engineering Ltd is protected by 'Section 213(1) of the copyright, Designs and patent act 1988 as a property right which subsists in an original design'

Contact for Further information:- Tel:- 01706 756500  Fax:- 01706 374699  Email:- andym@kenmills.co.uk